C91100
Atlas Bronze offers C91100 Tin Bronze in
Solids, Plate, Rectangles and Castings. Atlas stocks a select variety of sizes in Plate per ASTM B22. This alloy is typically cast on a Made to Order basis. Please note that the method in which the material is
cast will depend on your size, specification and desired quantity.
__________________________________________________________________________________________
This material is available on a MADE TO ORDER basis. Click for a quote and be sure to enter all the specifics that you need.
 
For Centrifugals & Sand Castings
__________________________________________________________________________________________
TYPICALLY USED FOR:
This
material is used in a variety of applications. Typical uses for this
alloy are: Piston rings, bearings, bushings, bridge plates.
CHEMICAL COMPOSITION:
(%max., unless shown as range or min.)
NOTE: Information courtesy of Copper.org
| |
Cu(1) | Al | Sb | Fe | Pb | Ni(2) | P(3) | Si | S | Sn | Zn |
|---|
| Min./Max. | 82.0-85.0 | .005 | .20 | .25 | .25 | .50 | 1.0 | .005 | .05 | 15.0-17.0 | .25 | | Nominal | 83.5 | - | - | - | - | - | - | - | - | 16.0 | - |
(1) In determining Cu min., Cu may be calculated as Cu + Ni.
(2) Ni value includes Co.
(3) For continuous castings, P shall be 1.5%, max.
Note: Cu + Sum of Named Elements, 99.4% min.
MECHANICAL PROPERTIES:
(measured at room temperature, 68 F (20 C)
NOTE: Information courtesy of Copper.org
| Temper |
Section
Size |
Cold
Work |
Typ/
Min |
Temp |
Tensile
Strength |
Yield
Strength
(0.5% ext.
under load) |
Yield
Strength
(0.2%
offset) |
Yield
Strength
(0.05%
offset) |
El |
Rockwell
Hardness |
Vickens
Hard. |
Brinell
Hard. |
Shear
Strength |
Fatigue
Strength* |
Izod
Impact
Strength |
|---|
| in. |
% |
| F |
ksi |
ksi |
ksi |
ksi |
% |
B |
C |
F |
30T |
500 |
500 |
3000 |
ksi |
ksi |
ft-lb |
| mm. |
|
| C |
MPa |
MPa |
MPa |
MPa |
|
|
|
|
|
|
|
|
MPa |
MPa |
J |
| As Sand Cast | | M01 | 0.0 | 0 | TYP | 68 | 35 | 25 | - | - | 2 | - | - | - | - | - | - | 135 | - | - | 0.0 |
| 0.0 |
|
| 20 | 241 | 172 | - | - | 2 | - | - | - | - | - | - | 135 | - | - | 0.0 | | M01 | 0.0 | 0 | SMIN | 68 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.0 |
| 0.0 |
|
| 20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.0 |
*Fatigue Strength: 100 x 10 6cycles,
unless indicated as [N]X 106.
APPLICABLE SPECIFICATIONS:
NOTE: Information courtesy of Copper.org
| Product | Specification |
| Sand | ASTM B22 |
|
