C63200 Nickel Aluminum Bronze

C63200 aluminum bronze is available in Extruded Solid Bar Stock per ASTM B150 and as Forgings in Plate, Rounds and Rings per ASTM B124 and ASTM B171.

As Extruded Solid Bar RFQ Form
As Forgings RFQ Form

This nickel aluminum bronze alloy is available through the RFQ forms above.

Request a quote for ASTM B150 C63200 extruded solid bar with the first form.

C63200 TYPICAL USES:

Some of the typical areas where C63200 aluminum bronze is used are as follows:

Bearing Cages, Sleeve Bearings, Valve Stems, Shafts, Cams, Sea Water Valves, Sea Water Pump Bodies, Bushings

As a nickel aluminum bronze alloy, C63200 suits sea water valves and sea water pump bodies in particular.

• Bearing Cages,
• Sleeve Bearings,
• Valve Stems,
• Shafts,
• Cams,
• Sea Water Valves,
• Sea Water Pump Bodies,
• Bushings

C63200 CHEMICAL COMPOSITION:

_{(%max., unless shown as range or min.)}

(1) Cu value includes Ag.
(2) Fe content shall not exceed Ni content.
(3) Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.5% min.

The C63200 chemical composition above lists Cu, Al, Fe, Pb, Mn, Ni, and Si.

C63200 MECHANICAL PROPERTIES:

_{(measured at room temperature, 68 F (20 C)}

Fatigue Strength: 100 x 10 ⁶cycles,
unless indicated as [N]X 10⁶.

C63200 APPLICABLE SPECIFICATIONS:

For ASTM B150 C63200 bar, rod and shapes, see the specification list below.