C63200 Nickel Aluminum Bronze Forgings

Atlas Bronze offers C63200 Nickel Aluminum Bronze Forgings in Plate, Rounds and Rings per ASTM B124 or ASTM B171.

Forgings have distinct advantages over the other methods of Casting (such as Continuous Cast or Sand Castings). Forgings are not only a cost effective process that yields the optimum in performance, but also offer the flexibility of size change. For instance if it becomes necessary to increase a diameter or thickness, open-die forging readily accommodates such a change.

C63200 ADVANTAGES:

• Reduces the cross-section
• Improves the metallurgical microstructure
• Provide directional grain flow
• Eliminates porosity in Cast ingot

C63200 Nickel Aluminum Bronze Forgings are Made to Order. Tell us what your desired sizes are and we will work up a quote for specific to you. Please indicate if any specifications that must be met.

C63200 BRONZE FORGINGS TYPICAL USES:

Some of the typical areas that C63200 is used in, is as follows:

• Bearing Cages,
• Sleeve Bearings,
• Valve Stems,
• Shafts,
• Cams,
• Sea Water Valves,
• Sea Water Pump Bodies,
• Bushings

C63200 CHEMICAL COMPOSITION:

_{(%max., unless shown as range or min.)}

_{(1) Cu value includes Ag.
(2) Fe content shall not exceed Ni content.
(3) Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.5% min.}

C63200 MECHANICAL PROPERTIES:

_{(measured at room temperature, 68 F (20 C)}