Home > ALLOYS > Bronze - Wrought Alloys > C61400

C61400 Aluminum Bronze

Atlas Bronze carries C61400 Aluminum Bronze in Plate and sheet form. Our C61400 Aluminum Bronze Plate is per ASTM B169 and ASTM B171, 025 Temper (former soft), ASME SB169 and QQ-C-450. We carry a variety of thicknesses and widths in both full plates and drop pieces. We stock thicknesses from 1/8" thick up to 2" thick. We will cut the material to length on all dimensions, as we have 6 in house saws.

C61400 Sheet / Plate is known for possessing excellent mechanical properties and ductility. This makes this alloy suitable for high load applications, as well as construction of vessels with high-pressure requirements and the process of product subjected to corrosion and erosion.


Thickness Part#
0.1250 6140P-1
0.1875 6140P-1.5
0.2500 6140P-2
0.3750 6140P-3
0.5000 6140P-4
0.6250 6140P-5
0.7500 6140P-6
1.0000 6140P-8
1.5000 6140P-12
2.0000 6140P-16

C61400 TYPICAL USES:

Some of the typical areas that C61400 is used in, is as follows:

  • Condenser Tube and Piping Systems
  • Piping Systems
  • Welded Pipe
  • Seamless Tubing and Pipe
  • Chutes for Abrasive Grains
  • Heat Exchanger Tubes
  • Condenser Head Plates
  • Tanks
  • Corrosion Resistant Vessels
  • Machine Parts
  • Structural Components
  • Tube Sheets
  • Mining Shovels
  • Sea Water Piping

C61400 CHEMICAL COMPOSITION:

(%max., unless shown as range or min.)

Cu (1) Al Fe Pb Mn P Zn
Min./Max. Rem. 6.0-8.0 1.5-3.5 .01 1.0 .015 .20
Nominal 91.0 7.0 2.0 - - - -

(1) Cu value includes Ag.
Note: Cu + Sum of Named Elements, 99.5% min.

C61400 MECHANICAL PROPERTIES:

(measured at room temperature, 68 F (20 C)

Form Temper Code Tensile Strength (ksi) Yield Strength (0.5% ext. under load) (ksi) Elongation (%) Rockwell Hardness (B Scale) Shear Strength (ksi) Fatigue Strength* (ksi) Tensile Strength in Shear (ksi) Section Size (in)
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125
Flat Hard HO4 89 Typ 60 Typ 32 Typ 87 Typ - - - 0.125