Home > BRONZE > Bronze - Wrought Alloys > C67300

C67300 Leaded Silicon Manganese Brass Solid Bar Stock


Atlas carries C67300 Leaded Silicon Manganese Brass Solid Bar Stock in diameters ranging from 3/4" to 8". We carry full bars and we will cut the material to length. Some of the typical areas that C67300 is used in, is as follows: Hydraulic piston shoes, cylinder liners, and cams

__________________________________________________________________________________________






Diameter (inch) Part Number
.75000" 6730S-6
.87500" 6730S-7
.93750" 6730S-7.5
1.0000" 6730S-8
1.0313" 6730S-8.25
1.0938" 6730S-8.75
1.1250" 6730S-9
1.1875" 6730S-9.5
1.2500" 6730S-10
1.3125" 6730S-10.5
1.5000" 6730S-12
1.5625" 6730S-12.5
1.6250" 6730S-13
1.6875" 6730S-13.5
1.7500" 6730S-14
1.8750" 6730S-15
2.0000" 6730S-16
2.1250" 6730S-17
2.2500" 6730S-18
2.5000" 6730S-20
2.7500" 6730S-22
3.0000" 6730S-24
3.2500" 6730S-26
3.5000" 6730S-28
4.0000" 6730S-32
5.5000" 6730S-44
6.0000" 6730S-48
6.5000" 6730S-52
7.5000" 6730S-60
8.0000" 6730S-64

_________________________________________________________________________________________



TYPICAL USES:
Some of the typical areas that C67300 is used in, is as follows: Hydraulic piston shoes, cylinder liners, and cams



CHEMICAL COMPOSITION:

(%max., unless shown as range or min.)
Cu(1) Al Fe Pb Mn Ni(2) Si Sn Zn
Min./Max. 58.0-63.0 .25 .50 .40-3.0 2.0-3.5 .25 .50-1.5 .30 Rem.
Nominal 60.5 - - 1.7 2.7 - 1.0 - 34.1

(1) Cu value includes Ag.
(2) Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.5% min.


MECHANICAL PROPERTIES
:

(measured at room temperature, 68 F (20 C)
Temper Section
Size
Cold
Work
Typ/
Min
Temp Tensile
Strength
Yield
Strength
(0.5% ext.
under load)
Yield
Strength
(0.2%
offset)
Yield
Strength
(0.05%
offset)
El Rockwell
Hardness
Vickens
Hard.
Brinell
Hard.
Shear
Strength
Fatigue
Strength*
Izod
Impact
Strength

in. %
F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb

mm.

C MPa MPa MPa MPa







MPa MPa J
Bar
H50 <1.00 0 min 68 65 40 - - 11 80 - - - - - - - - 0.0

<25.4

20 448 276 - - 11 80 - - - - - - - - 0.0

*Fatigue Strength: 100 x 10 6cycles,
unless indicated as [N]X 106.


APPLICABLE SPECIFICATIONS:

Product Specification
Bar SAE J461, J463
Forgings SAE J461, J463
Rod SAE J463, J461
Shapes SAE J463, J461