Home > BRONZE > Bronze - Cast Alloys > C90700 > C90700 Solid Bar
We found 0 results matching your criteria.

C90700 Tin Bronze Solid Bar

Atlas Bronze offers
C90700 Tin Bronze, SAE 65 Solid Bar stock in 144" full bar lengths. We will also cut the bars to your exact length as needed. This material is utilized in a variety of applications. The typical uses for CDA 907 are Gears, Bearings and Bushings.

__________________________________________________________________________________________






.4375" diameter - 9070S-3.5
.5000" diameter - 9070S-4
.6250" diameter - 9070S-5
.7500" diameter - 9070S-6
1.000" diameter - 9070S-8
1.250" diameter - 9070S-10
1.500" diameter - 9070S-12
1.750" diameter - 9070S-14
2.000" diameter - 9070S-16
2.500" diameter - 9070S-20
2.750" diameter - 9070S-22
3.000" diameter - 9070S-24
3.250" diameter - 9070S-26
3.500" diameter - 9070S-28
4.000" diameter - 9070S-32

__________________________________________________________________________________________


TYPICALLY USED FOR:


This material is used in a variety of applications. Typical uses for this alloy are: Gears, bearing bushings.



CHEMICAL COMPOSITION:

(%max., unless shown as range or min.)
NOTE: Information courtesy of Copper.org
Cu(1)AlSbFePbNi(2)P(3)SiSSnZn
Min./Max.88.0-90.0.005.20.15.50.50.30.005.0510.0-12.0.50
Nominal89.0--------11.0-

(1) In determining Cu min., Cu may be calculated as Cu + Ni.
(2) Ni value includes Co.
(3) For continuous castings, P shall be 1.5%, max.
Note: Cu + Sum of Named Elements, 99.4% min.



MECHANICAL PROPERTIES:

(measured at room temperature, 68 F (20 C)
NOTE: Information courtesy of Copper.org
Temper Section
Size
Cold
Work
Typ/
Min
Temp Tensile
Strength
Yield
Strength
(0.5% ext.
under load)
Yield
Strength
(0.2%
offset)
Yield
Strength
(0.05%
offset)
El Rockwell
Hardness
Vickens
Hard.
Brinell
Hard.
Shear
Strength
Fatigue
Strength*
Izod
Impact
Strength

in. %
F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb

mm.

C MPa MPa MPa MPa







MPa MPa J
As Sand Cast
M010.00TYP684422--20-----80--250.0

0.0

20303152--20-----80--1720.0
M010.00SMIN683517--10-----65---0.0

0.0

20241117--10-----65---0.0
As Centrifugal Cast
M020.00TYP685530--16-----102---0.0

0.0

20379207--16-----102---0.0
As Continuous Cast
M070.00SMIN684025--10---------0.0

0.0

20276172--10---------0.0
As Permanent Mold Cast
M050.00TYP685530--16-----102---0.0

0.0

20379207--16-----102---0.0
As Centrifugal Cast
M020.00SMIN685028--12-----95---0.0

0.0

20345193--12-----95---0.0

*Fatigue Strength: 100 x 10 6cycles,
unless indicated as [N]X 106.



APPLICABLE SPECIFICATIONS:

NOTE: Information courtesy of Copper.org
ProductSpecification
CentrifugalASTM B427
SAE J462, J461
ContinuousASTM B505
SAE J461, J462
IngotASTM B30
SandASTM B427
SAE J461, J462