Home > BRONZE > Bronze - Wrought Alloys > C63000 > C63000 Solid Bar
We found 0 results matching your criteria.

C63000 Nickel Aluminum Solid Bar


Atlas carries C63000 Nickel Aluminum Bronze Solid Bar per ASTM B150, ASME SB150, AMS 4640, QQ-C-465 in stock. We carry a very large range of sizes and will cut the material to length.


C63000 Aluminum Bronze is an extruded or forged Wrought Alloy that contains Nickel (nominal 5%). As an aluminum bronze, C63000 has an excellent resistance to salt water corrosion and displays exceptional strength and toughness as well. C63000 is typically used where higher mechanical properties are required. It is used in equipment for marine applications, such as: valve stems, high strength bushings, valve guides and seats, gears, cams, ship propellers, as well as propeller nuts and shafts.

Aluminum Bronzes are most commonly used in water applications because of their great resistance to corrosion in a variety of water environments. This makes them preferable to other engineering materials.

__________________________________________________________________________________________






Available in the follow
ing sizes:

Diameter (inches)
Part Number
.3750" 6300S-3
.4375" 6300S-3.5
.5000" 6300S-4
.5625"
6300S-4.5
.6250" 6300S-5
.6875" 6300S-5.5
.7500" 6300S-6
.8125" 6300S-6.5
.8750" 6300S-7
.9375" 6300S-7.5
1.000" 6300S-8
1.125" 6300S-9
1.1875"
6300S-9.5
1.250"
6300S-10
1.375" 6300S-11
1.500"
6300S-12
1.625"
6300S-13
1.750"
6300S-14
1.875"
6300S-15
2.000"
6300S-16
2.125" 6300S-17
2.250"
6300S-18
2.375"
6300S-19
2.500" 6300S-20
2.625"
6300S-21
2.750"
6300S-22
3.000" 6300S-24
3.250"
6300S-26
3.500"
6300S-28
3.750"
6300S-30
4.000" 6300S-32
4.250"
6300S-34
4.500"
6300S-36
4.750"
6300S-38
5.000"
6300S-40
5.750" 6300S-46
6.000"
6300S-48
6.500"
6300S-52
7.000"
6300S-56
7.500"
6300S-60
8.000"
6300S-64
9.000"
6300S-72
10.00"
6300S-80







TYPICAL USES:
Some of the typical areas that C63000 is used in, is as follows: Valve Seats, Plunger Tips, Condenser Tube for Power Stations and Desalting Units, Shafting, Pump Parts, Cams, Gears, Valve Guides, Aircraft Parts, Pump Shafts, Structural Members, Corrosion Resistant Articles, Hydraulic Bushings for Earth Moving Equipment, Valve Balls, Bushings, Bearings, Heat Exchanger Flanges, Heat Exchanger Headers, Tanks, Welded Piping Systems, Balls



CHEMICAL COMPOSITION:

(%max., unless shown as range or min.)
Cu(1) Al Fe Mn Ni(2) Si Sn Zn
Min./Max. Rem. 9.0-11.0 2.0-4.0 1.5 4.0-5.5 .25 .20 .30
Nominal 82.0 10.0 3.0 - 5.0 - - -

(1) Cu value includes Ag.
(2) Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.5% min.



MECHANICAL PROPERTIES
:

(measured at room temperature, 68 F (20 C)
Temper Section
Size
Cold
Work
Typ/
Min
Temp Tensile
Strength
Yield
Strength
(0.5% ext.
under load)
Yield
Strength
(0.2%
offset)
Yield
Strength
(0.05%
offset)
El Rockwell
Hardness
Vickens
Hard.
Brinell
Hard.
Shear
Strength
Fatigue
Strength*
Izod
Impact
Strength

in. %
F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb

mm.

C MPa MPa MPa MPa







MPa MPa J
Rod
M30 4 0 TYP 68 100 60 - - 15 96 - - - - - - 62 36 0.0

102

20 689 414 - - 15 96 - - - - - - 427 248 0.0
Bar
HR50 2 10 TYP 68 100 60 - - 15 96 - - - - - - - - 0.0

51

20 689 414 - - 15 96 - - - - - - - - 0.0
Rod
HR50 3 10 TYP 68 112 62 - - 20 96 - - - - - - 65 37 0.0

76

20 772 427 - - 20 96 - - - - - - 448 255 0.0
Bar
M30 3 0 TYP 68 90 50 - - 15 96 - - - - - - -