Home > PLATE > Wearplate / Ground Plate
We found 0 results matching your criteria.

Ground Plate is Atlas Bronze's specialty product.  This material is a cost saver and time saver.  Since the material is stocked in a ground condition +/- .002 on the thickness (we aim for +/- .000 so if you need a closer tolerance we will mic material upon request)

Our bronze flat stock is machined from continuous cast, fine grain plate. Our bars are supplied ground top & bottom.  

Benefits: No milling or grinding necessary on the top or on the bottom – already done for you!!  No need to block it in, taping it down or tow clamp it anymore! 

Sizes: C95400 Aluminum Bronze & C93200 Bearing Bronze from ¼ to 1” x 12” wide x 144” cut to your size




Click on the below image to select your size:


 

 





C93200 CHEMICAL COMPOSITION:

(%max., unless shown as range or min.)
NOTE:  Information courtesy of Copper.org
  Cu(1)AlSbFePbNi(2)P(3)SiSSnZn
Min./Max.81.0-85.0.005.35.206.0-8.01.0.15.005.086.3-7.51.0-4.0
Nominal83.0---7.0----6.92.5

(1) In determining Cu min., Cu may be calculated as Cu + Ni.
(2) Ni value includes Co.
(3) For continuous castings, P shall be 1.5%, max.
Note: Cu + Sum of Named Elements, 99.0% min.



C93200 MECHANICAL PROPERTIES:

(measured at room temperature, 68 F (20 C)
NOTE:  Information courtesy of Copper.org
Temper Section
Size
Cold
Work
Typ/
Min
Temp Tensile
Strength
Yield
Strength
(0.5% ext.
under load)
Yield
Strength
(0.2%
offset)
Yield
Strength
(0.05%
offset)
El Rockwell
Hardness
Vickens
Hard.
Brinell
Hard.
Shear
Strength
Fatigue
Strength*
Izod
Impact
Strength

in. %
F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb

mm.

C MPa MPa MPa MPa







MPa MPa J
As Sand Cast
M010.00TYP683518--20-----65--166.0

0.0

20241124--20-----65--1108.0
As Centrifugal Cast
M020.00SMIN683014--15---------0.0

0.0

2020797--15---------0.0
As Continuous Cast
M070.00SMIN683520--10---------0.0

0.0

20241138--10---------0.0
As Sand Cast
M010.00SMIN683014--15---------0.0

0.0

2020797--15---------0.0

*Fatigue Strength: 100 x 10 6cycles,
unless indicated as [N]X 106.




C95400 CHEMICAL COMPOSITION:

(%max., unless shown as range or min.)
NOTE:  Information courtesy of Copper.org
  CuAlFeMnNi(1)
Min./Max.83.0 min10.0-11.53.0-5.0.501.5
Nominal83.210.84.0--

(1) Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.5% min.



C95400 MECHANICAL PROPERTIES:

(measured at room temperature, 68 F (20 C)
NOTE:  Information courtesy of Copper.org
Temper Section
Size
Cold
Work
Typ/
Min
Temp Tensile
Strength
Yield
Strength
(0.5% ext.
under load)
Yield
Strength
(0.2%
offset)
Yield
Strength
(0.05%
offset)
El Rockwell
Hardness
Vickens
Hard.
Brinell
Hard.
Shear
Strength
Fatigue
Strength*
Izod
Impact
Strength

in. %
F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb

mm.

C MPa MPa MPa MPa







MPa MPa J
As Sand Cast
M010.00TYP688535--18------170472816.0

0.0

20586241--18------