Home > BRONZE > Bronze - Cast Alloys > C95900 > C95900 Solid Bar
We found 0 results matching your criteria.

C95900 Aluminum Bronze Solid Bar

Atlas Bronze offers
C95900 Aluminum Bronze in Solids and Rectangles. This alloy is available as both an Off-the-Shelf product and in special castings.
This is an excellent heavy duty bearing alloy. However, it does not tolerate misalignment or dirty lubricants, and generally should be used against hardened steel shafts, with both shaft and bearing machined to fine surface finishes.


This material is used in a variety of applications. Typical uses for this alloy are: Bushings, High Strength Clamps, Gears, Valves, Bearings, Pawl, Valve Bodies, Landing Gear Parts, Worm Gears, Machine Parts, Pressure Blocks for the Steel Industry, Bearing Segments for the Steel Industry, Valve Seats, Valve Guides, Pickling Hooks, Spur Gears, Heavily Loaded Worm Gears, Pump Parts

__________________________________________________________________________________________







DIAMETER (inches)PART NUMBER
1.000"9590S-8
1.250"9590S-10
1.500"9590S-12
1.750"9590S-14
2.000"9590S-16
2.250"9590S-18
2.500"9590S-20
3.000"9590S-24
3.500"9590S-28
4.000"9590S-32
4.500"9590S-36
5.000"9590S-40
13.00"9590S-104
14.00"9590S-112
15.00"9590S-120

__________________________________________________________________________________________



TYPICALLY USED FOR:


This material is used in a variety of applications. Typical uses for this alloy are: Bushings, High Strength Clamps, Gears, Valves, Bearings, Pawl, Valve Bodies, Landing Gear Parts, Worm Gears, Machine Parts, Pressure Blocks for the Steel Industry, Bearing Segments for the Steel Industry, Valve Seats, Valve Guides, Pickling Hooks, Spur Gears, Heavily Loaded Worm Gears, Pump Parts



CHEMICAL COMPOSITION:

Chemical Composition
(%max., unless shown as range or min.)
CuAlFeMnNi(1)
Min./Max.Rem.12.0-13.53.0-5.01.5.50
Nominal-12.74.0--
(1) Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.5% min.



MECHANICAL PROPERTIES:

(measured at room temperature, 68 F (20 C)
Temper Section
Size
Cold
Work
Typ/
Min
Temp Tensile
Strength
Yield
Strength
(0.5% ext.
under load)
Yield
Strength
(0.2%
offset)
Yield
Strength
(0.05%
offset)
El Rockwell
Hardness
Vickens
Hard.
Brinell
Hard.
Shear
Strength
Fatigue
Strength*
Izod
Impact
Strength

in. %
F ksi ksi ksi ksi % B