Home > BRONZE > Bronze - Cast Alloys > C92500 > C92500 Solid Bar
We found 0 results matching your criteria.

Atlas Bronze offers C92500 Leaded Tin Bronze, SAE 640 Solid Bar stock in full length bar stock and in cut lengths to your desired length.

This material is used in a variety of applications. Typical uses for this alloy are: Gears, automotive synchronizer rings.

__________________________________________________________________________________________







DIAMETER (inches)PART NUMBER
.5000"9250S-4
.7500"9250S-6
1.000"9250S-8
1.500"9250S-12
1.625"9250S-13
2.000"9250S-16
2.500"9250S-20
3.000"9250S-24
3.250"9250S-26
3.500"9250S-28
4.000"9250S-32
4.500"9250S-36
5.000"9250S-40
6.000"9250S-48


TYPICALLY USED FOR:


This material is used in a variety of applications. Typical uses for this alloy are: Gears, automotive synchronizer rings.



CHEMICAL COMPOSITION:

(%max., unless shown as range or min.)
NOTE: Information courtesy of Copper.org
Cu(1)AlSbFePbNi(2)P(3)SiSSnZn
Min./Max.85.0-88.0.005.25.301.0-1.5.8-1.5.30.005.0510.0-12.0.50
Nominal86.5---1.31.2---11.0-

(1) In determining Cu min., Cu may be calculated as Cu + Ni.
(2) Ni value includes Co.
(3) For continuous castings, P shall be 1.5%, max.
Note: Cu + Sum of Named Elements, 99.3% min.



MECHANICAL PROPERTIES:

(measured at room temperature, 68 F (20 C)
NOTE: Information courtesy of Copper.org
Temper Section
Size
Cold
Work
Typ/
Min
Temp Tensile
Strength
Yield
Strength
(0.5% ext.
under load)
Yield
Strength
(0.2%
offset)
Yield
Strength
(0.05%
offset)
El Rockwell
Hardness
Vickens
Hard.
Brinell
Hard.
Shear
Strength
Fatigue
Strength*
Izod
Impact
Strength

in. %
F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb

mm.

C MPa MPa MPa MPa







MPa MPa J
As Sand Cast
M010.00TYP684420--20-----80---0.0

0.0

20303138--20-----80---0.0
As Continuous Cast
M070.00SMIN684024--10---------0.0

0.0

20276165--10---------0.0

*Fatigue Strength: 100 x 10 6cycles,
unless indicated as [N]X 106.



APPLICABLE SPECIFICATIONS:

NOTE: Information courtesy of Copper.org
ProductSpecification
ContinuousASTM B505
SAE J461, J462
IngotASTM B30
SandSAE J461, J462