Home > BRONZE > Bronze - Wrought Alloys > C67500
We found 0 results matching your criteria.

Atlas carries
C67500 Manganese Bronze in Solid Bar stock. We carry a very large range of sizes and will cut the material to length.
Some of the typical areas that C67500 is used in, is as follows: Valve Bodies, Balls, Valve Stems, Bushings, Aircraft Parts

__________________________________________________________________________________________






Diameters (inch)Part Number
.3125"6750S-2.5
.3750"6750S-3
.4375"6750S-3.5
.5000"6750S-4
.6250"6750S-5
.7500"6750S-6
.8750"6750S-7
1.000"6750S-8
1.125"6750S-9
1.250"6750S-10
1.375"6750S-11
1.500"6750S-12
1.625"6750S-13
1.750"6750S-14
2.000"6750S-16
2.250"6750S-18
2.500"6750S-20
2.750"6750S-22
3.000"6750S-24
3.250"6750S-26
3.500"6750S-28
4.000"6750S-32
4.500"6750S-36
5.000"6750S-40
5.500"6750S-44
6.000"6750S-48
7.000"6750S-56
8.000"6750S-64
10.00"6750S-80
11.50"6750S-92
__________________________________________________________________________________________



TYPICAL USES
Some of the typical areas that C67500 is used in, is as follows: Valve Bodies, Balls, Valve Stems, Bushings, Aircraft Parts



CHEMICAL COMPOSITION

(%max., unless shown as range or min.)
Cu(1)AlFePbMnSnZn
Min./Max.57.0-60.0.25.8-2.0.20.05-.50.50-1.5Rem.
Nominal58.5-1.4-.101.039.0

(1) Cu value includes Ag.
Note: Cu + Sum of Named Elements, 99.5% min.



MECHANICAL PROPERTIES


(measured at room temperature, 68 F (20 C)
Temper Section
Size
Cold
Work
Typ/
Min
Temp Tensile
Strength
Yield
Strength
(0.5% ext.
under load)
Yield
Strength
(0.2%
offset)
Yield
Strength
(0.05%
offset)
El Rockwell
Hardness
Vickens
Hard.
Brinell
Hard.
Shear
Strength
Fatigue
Strength*
Izod
Impact
Strength

in. %
F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb

mm.

C MPa MPa MPa MPa







MPa MPa J
Rod
H01210TYP687242--2777------44-0.0

51

20496290--2777------303-0.0
O6010TYP686530--3365------42-0.0

25.4

20448207--3365------290-0.0
H02120TYP688460--1990------48-0.0

25.4

20579414--1990------331-0.0
H01110TYP687745--2383------47-0.0

25.4

20531310--2383------324-0.0

*Fatigue Strength: 100 x 10 6cycles,
unless indicated as [N]X 106.


APPLICABLE SPECIFICATIONS:

ProductSpecification
BarASTM B138
SAE J463, J461
Bar, ForgingASTM B124
BoltsASTM F468
Forgings, DieASTM B283
SAE J463, J461
NutsASTM F467
RodASTM B138
SAE J463, J461
Rod, ForgingASTM B124
ScrewsASTM F468
ShapesASTM B138
SAE J463, J461
Shapes, ForgingASTM B124
StudsASTM F468